The DS-D42A0CO-2APA sits at the far end of the outdoor range: a 10 mm pixel pitch at 10,000 dots per square metre, intended for billboards and large-format signs where the audience is far enough away that finer pixels would be invisible and simply more expensive. On a screen read from twenty metres or more, P10 and P6.6 look identical — but the P10 wall costs materially less per square metre and draws less power per pixel delivered.
The cabinet shares the CO platform with the P6.6 model: the same 960 × 960 × 100 mm aluminium profile, the same IP66 rating, the same heat dissipation approach that removes the need for air conditioning, and the same aviation-plug interconnect. Weight is 28 kg per cabinet and brightness is factory set at 6,500 nits with a 7,000 nit peak.
Choosing between P6.6 and P10 is a viewing-distance decision, not a quality decision. Tell us the closest point from which the screen will actually be read and we will size the pitch to it rather than upward.
| Specification | Value |
|---|---|
| Pixel pitch | 10 mm (P10 category) — SMD triad LED |
| Pixel density | 10,000 dots/m² |
| Cabinet size | 960 × 960 × 100 mm — 0.9216 m² |
| Cabinet resolution | 96 × 96 |
| Cabinet weight | 28 kg |
| Module composition | 3 × 2 |
| Brightness | 6,500 nits preset · 7,000 nits peak |
| Colour temperature | 9,300 K adjustable |
| Viewing angle | 160° H / 130° V |
| Contrast ratio | ≥ 8,000 : 1 |
| Protection | IP66 |
| Maintenance | Front / rear |
| Refresh rate | up to 3,840 Hz — 14–16-bit |
| Power | ≤ 510 W/m² peak · ≤ 170 W/m² average |
| Operating temperature | −40 °C to 60 °C |
| Lamp lifespan | 100,000 hours |
Best fit: highway billboards, large-format outdoor advertising, stadium exteriors, industrial and logistics site signage — read from twenty metres and beyond.
Service: survey, structural and electrical coordination, supply, installation, commissioning and maintenance from an authorised Hikvision partner in Riyadh.
