An LED wall is only as available as its spare parts. The DS-D4025CS-1F/M is the replacement light module for the DS-D4025CS-1F cabinet: six of them make up one cabinet, and any single one can be pulled from the front and swapped without dismantling the wall or taking the structure apart. Holding a small quantity on site is what turns a dead-module incident from a service call into a five-minute fix.
Specifications
| Function | Spare light module for DS-D4025CS-1F |
| Pixel pitch | 2.5 mm |
| Module dimensions | 320 × 160 mm |
| Module resolution | 128 × 64 |
| Pixel configuration | SMD Triad LED |
| Pixel density | 160,000 dots/m² |
| Modules per cabinet | 6 (2 × 3) |
| Replacement direction | Front, without removing the cabinet |
| Packed weight | 24 lamp boards per box: 12.0 kg |
Where it fits best
Any site already running DS-D4025CS-1F cabinets — retail chains, bank branches, government reception halls. The usual practice is to hold spares as a percentage of installed modules rather than a fixed count; Fast Vision advises on the right figure per project based on screen size, operating hours and how quickly the site needs to recover.
Related spares: DS-D42CS-1F/H hub board · DS-D42CS-1F/R receiving card · DS-D42CS-1F/PC power cable · PW.L188W1.802-PC power supply.
Service: Fast Vision supplies spare parts, holds stock and carries out module replacement and colour re-calibration after any swap, as an authorised Hikvision distributor in Saudi Arabia.
