The DS-D4215FI-CGFB belongs to Hikvision's CGF cabinet family, built around one idea: a cabinet narrow enough to fit where a conventional 500 × 500 panel cannot. At 750 × 250 mm it slots into shop fascias, the strip above a retail aisle, and the header band over a mall entrance — the shapes that fixed square cabinets force you to compromise on.
The cabinet is die-cast aluminium with a 50 mm frame depth and weighs 4.59 kg, giving a finished wall of roughly 21 kg per square metre. The bottom shell is left open and the sides are perforated, so heat escapes straight into the air without fans — the wall stays silent. Modules are held by magnetic columns and a knob lock, and every component is serviced from the front.
Because the cabinet is a 250 mm multiple, the family also supports staggered splicing in 250 mm steps, right-angle corner joints, and outer-arc curves up to 10° — so an irregular or gently curved wall is built from stock cabinets instead of a custom order.
| Specification | Value |
|---|---|
| Pixel pitch | 1.56 mm — SMD triad LED |
| Pixel density | 409,600 dots/m² |
| Cabinet size | 750 × 250 × 50 mm |
| Cabinet resolution | 480 × 160 |
| Cabinet weight | 4.59 kg |
| Module composition | 3 × 1 |
| Brightness | 800 nits standard · 1,000 nits peak |
| Colour temperature | 3,000–10,000 K adjustable |
| Viewing angle | 160° H / 160° V |
| Contrast ratio | 5,000 : 1 |
| Refresh rate | 3,840 Hz — 16-bit greyscale |
| Protection | Front IP60 |
| Maintenance | Front, all components |
| Power | 520 W/m² peak · 180 W/m² average |
| Certification | CE-EMC, CE-LVD, CB-LVD, RoHS |
Best fit: shop gate-head displays, retail fascias, narrow bands above aisles and escalators, and any wall where the available height is fixed and small.
Service: we calculate the cabinet grid against your exact opening, supply controllers and spares, mount and calibrate, and hand over a wall that matches the architectural line rather than approximating it.
Request a quotation for DS-D4215FI-CGFB.
Delivered in the KingdomFast Vision supplied and installed 1,310 Hikvision indoor LED cabinets for SDAIA in Riyadh — three screens totalling approximately 89.7 m², built from DS-D4025CS-1F (P2.5) and DS-D4418FI-CKF (P1.8) cabinets and commissioned within a two-to-four week programme. → Read the full SDAIA case study
