Where the narrower CGF cabinets solve awkward shapes, the CGFF solves area. Each cabinet covers half a square metre at 1,000 × 500 mm, so a 6 × 3 metre lobby wall is thirty-six cabinets rather than the ninety-six it would take in the 750 × 250 format. Fewer units means fewer seams to align and a measurably shorter commissioning.



Learn More


The pixel specification is unchanged from the rest of the P1.5 family: 1.56 mm pitch, 409,600 dots/m², 800 nits standard, 5,000:1 contrast, 160° viewing in both axes so the image holds for people walking past at an angle rather than only for those standing square to it. The cabinet weighs 10.54 kg — still a one-person lift — and is die-cast aluminium with front maintenance throughout.

At 1.5 mm the comfortable viewing distance is roughly a metre and a half upward (a market rule of thumb, not a datasheet figure), which places this panel correctly in a lobby, a large meeting room, or a showroom where visitors approach the wall rather than view it from across a hall.

SpecificationValue
Pixel pitch1.56 mm — SMD triad LED
Pixel density409,600 dots/m²
Cabinet size1,000 × 500 × 50 mm — 0.5 m²
Cabinet resolution640 × 320
Cabinet weight10.54 kg
Module composition2 × 2
Brightness800 nits standard · 1,000 nits peak
Colour temperature3,000–10,000 K adjustable
Viewing angle160° H / 160° V
Contrast ratio5,000 : 1
Refresh rate3,840 Hz — 16-bit greyscale
ProtectionFront IP60
MaintenanceFront, all components
Power520 W/m² peak · 180 W/m² average


Best fit: corporate lobbies, large meeting and training rooms, showrooms, hotel event foyers — large indoor surfaces viewed from a metre and a half or more.

Service: site survey, wall sizing to native content resolution, steel structure, sending/receiving cards, installation, calibration and warranty from an authorised Hikvision partner.

Request a quotation for DS-D4215FI-CGFF.


Delivered in the KingdomFast Vision supplied and installed 1,310 Hikvision indoor LED cabinets for SDAIA in Riyadh — three screens totalling approximately 89.7 m², built from DS-D4025CS-1F (P2.5) and DS-D4418FI-CKF (P1.8) cabinets and commissioned within a two-to-four week programme. → Read the full SDAIA case study
→ Read the full SDAIA case study