DS-D4218FI-CWF — P1.8 Cabinet for Larger Walls on a Smaller Electrical Load
This is the cabinet to specify when the wall needs to be big rather than close. It shares the same 600 × 337.5 mm body as its P1.5 sibling, but at 1.875 mm pitch its 320 × 180 resolution means ⚙️ a 6 × 6 array reaches exactly 1920 × 1080 across 3.60 m by 2.03 m — a fifth more diagonal for the same pixel count. The electrical consequence is the more interesting one: peak draw is ≤ 336 W/m² against 750 W/m² on the finer model, so a larger wall can be delivered on a smaller distribution board, thinner feeds and less cooling. On a project where the electrical room is already committed, that is often what decides the pitch.
Specifications
| Pixel structure | Surface mounted trinity LED |
| Pixel pitch | 1.875 mm |
| Pixel density | 284,444 dots/m² |
| Modules per cabinet | 1 × 2 |
| Cabinet dimensions (W×H×D) | 600 × 337.5 × 61 mm |
| Cabinet resolution | 320 × 180 |
| Cabinet area | 0.2025 m² |
| Cabinet weight | 8.3 kg |
| Cabinet material | Magnalium |
| Maintenance | Front maintenance for all components; power supply serviceable from front and rear |
| Brightness (white balance) | 600 cd/m² default, up to 800 cd/m² |
| Colour temperature | 3000 – 10000 adjustable |
| Viewing angle | Horizontal 160°, vertical 160° |
| Contrast ratio | ≥ 3000:1 |
| Brightness uniformity | ≥ 97% |
| Colour uniformity | ≤ ± 0.003 Cx, Cy |
| Driving method | Constant current |
| Frame frequency | 60 Hz |
| Refresh rate | Up to 3840 Hz |
| Grey level | Up to 16 bit |
| Power supply | 100 – 240 VAC ± 15% |
| Max. power consumption | ≤ 336 W/m² |
| Average power consumption | < 160 W/m² |
| Working temperature | -10 °C to 40 °C |
| Working humidity | 10% – 80% RH, non-condensing |
| Storage temperature | -20 °C to 60 °C |
| Storage humidity | 10% – 85% RH, non-condensing |
| Gross weight | 9.8 kg including packaging |
| Package dimensions | 796 × 484 × 192 mm |
| Wooden box dimensions | 1035 × 875 × 605 mm (5A plywood) |
Where it fits best
Lobbies, atriums, exhibition halls and auditorium backdrops — spaces where the audience stands back and the wall needs presence more than it needs detail. Comfortable viewing starts at roughly two metres at this pitch (an industry rule of thumb, not a datasheet figure).
Sending card: DS-D42C04-H, listed as the accessory for this model.
Service: Fast Vision supplies, installs, calibrates and warranties this model as an authorised Hikvision distributor in Saudi Arabia.
Delivered in the KingdomFast Vision supplied and installed 1,310 Hikvision indoor LED cabinets for SDAIA in Riyadh — three screens totalling approximately 89.7 m², built from DS-D4025CS-1F (P2.5) and DS-D4418FI-CKF (P1.8) cabinets and commissioned within a two-to-four week programme. → Read the full SDAIA case study
Request a quotation · Book a free site survey→ Read the full SDAIA case study
